»Designed for load frames below 30kN; can also be used for other load frames with appropriate adapters»Anti-corrosion aluminum fixtures are lightweight and easy to operate»In each test, the clamping force of the fixture on the sample is the same to minimize operating errors»The pressure is adjustable, so that the fixture can be used to test various materials»Keep the clamping force stable to avoid sliding errors and inconsistent measurements
model | JDQA102A | JDQA502A | JDQA103A |
name | 00 N pneumatic clamp | 500 N pneumatic clamp | 1 kN pneumatic clamp |
Rated force | 100N | 500N | 1000N |
temperature range | Room temperature | Room temperature | Room temperature |
Weight (upper part) | 380g | 850g | 1100g |
Weight (lower part) | 380g | 850g | 1100g |
Connector style (upper)/(lower) | 20mm | 20mm | 20mm |
| Size (height * width * depth) (upper part) | 119 mm × 85 mm × 53 mm | 146 mm × 105 mm × 70 mm | 155 mm × 114 mm × 84 mm |
Dimensions (height * width * depth) (lower part) | 119 mm × 85 mm × 53 mm | 146 mm × 105 mm × 70 mm | 155 mm × 114 mm × 84 mm |
application | Tensile test, tear test | Tensile test, tear test | Tensile test, tear test |
Application sample | Plastic film, metal foil layer, rubber sheet | ||
Compatible models | Models below 30kN | ||
Contact surface material | rubber | rubber | rubber |
Fixture opening | 0-3 mm | 0-6 mm | 0-4mm |
Surface width | 22mm | 30mm | 32mm |
Maximum input pressure | 0.8MPa | ||
Code | Description |
GB/T 1040.3-2006 | Determination of the tensile properties of plastics-Part 3: Test conditions for films and sheets |
ISO 527-3:2003 | Determination of the tensile properties of plastics-Part 3: Test conditions for films and sheets |
ASTM D1004-07 | Tear strength of plastic film and sheet Standard test method |
QB/T 1130-1991 | Determination of plastic tear strength Right angle of test piece |
WeChat account
Technical Support
