Welcome to the official website of Shenzhen Enpuda Industrial Systems Co., Ltd!
Hotline: 400-103-8118
Products Products
联系我们

地点:深圳市宝安区航城大道西乡光电研发大厦二楼

电话:0755-2775 9293

手机:188-666-5188

邮箱:yidongyun@qq.com

Fatigue + Multichannel Test Software

Functional uses:
面料: 1. Test selection: Connecting the set sample to the actuator, we can test only one channel or multiple channels, and each test can control the coordinated loading of multiple channels at the same time or run separately.2. The setting of test parameters: setting the control mode and related parameters, the response mode of overshoot, the unloading time, the starting point of the test, etc.3. System control mode: force, displacement and deformation control, and the two control modes can be smoothly converted;4. Waveform types: sine wave, triangle wave, square wave, random wave, sweep wave, combined wave, etc.5. Definition of test spectrum: setting the loading mode (load or displacement), loading various waveforms, frequencies, phases, final values and repetition times, etc. The definition of test spectrum is very flexible, and it can simulate almost any curve.6. Curve display: the type, range and length of the curve are optional; multiple curves can be displayed simultaneously in the same curve display box, and the curve display box can be opened at the same time.7. Channel allocation: the channel occupied by the test can be set at will;8. Installation of specimens: for adjusting the position of specimens before test;9. Set the zero position and gain of the sensor to calibrate the sensor.10. Load spectrum setting software for static test spectrum and fatigue test spectrum;11. System Diagnosis: All kinds of hardware faults of the system can be detected before the start of the test.12. System security protection software.Single channel main interface:Test sinusoidal waveform:参数设置:Running Tips:
类型: Fatigue + Multichannel Test Software
颜色:
型号:
咨询热线:
  • Standard
  • Characteristic
  • Technical parameter
  • 智能监测
Standard

1. Test selection: Connecting the set sample to the actuator, we can test only one channel or multiple channels, and each test can control the coordinated loading of multiple channels at the same time or run separately.

2. The setting of test parameters: setting the control mode and related parameters, the response mode of overshoot, the unloading time, the starting point of the test, etc.

3. System control mode: force, displacement and deformation control, and the two control modes can be smoothly converted;

4. Waveform types: sine wave, triangle wave, square wave, random wave, sweep wave, combined wave, etc.

5. Definition of test spectrum: setting the loading mode (load or displacement), loading various waveforms, frequencies, phases, final values and repetition times, etc. The definition of test spectrum is very flexible, and it can simulate almost any curve.

6. Curve display: the type, range and length of the curve are optional; multiple curves can be displayed simultaneously in the same curve display box, and the curve display box can be opened at the same time.

7. Channel allocation: the channel occupied by the test can be set at will;

8. Installation of specimens: for adjusting the position of specimens before test;

9. Set the zero position and gain of the sensor to calibrate the sensor.

10. Load spectrum setting software for static test spectrum and fatigue test spectrum;

11. System Diagnosis: All kinds of hardware faults of the system can be detected before the start of the test.

12. System security protection software.



Single channel main interface:




Test sinusoidal waveform:



参数设置:



Running Tips:



Characteristic
Technical parameter
项目简介:
适应人群:
项目流程:
技术优势:
注意事项:
蜕变前后:

1. Test selection: Connecting the set sample to the actuator, we can test only one channel or multiple channels, and each test can control the coordinated loading of multiple channels at the same time or run separately.

2. The setting of test parameters: setting the control mode and related parameters, the response mode of overshoot, the unloading time, the starting point of the test, etc.

3. System control mode: force, displacement and deformation control, and the two control modes can be smoothly converted;

4. Waveform types: sine wave, triangle wave, square wave, random wave, sweep wave, combined wave, etc.

5. Definition of test spectrum: setting the loading mode (load or displacement), loading various waveforms, frequencies, phases, final values and repetition times, etc. The definition of test spectrum is very flexible, and it can simulate almost any curve.

6. Curve display: the type, range and length of the curve are optional; multiple curves can be displayed simultaneously in the same curve display box, and the curve display box can be opened at the same time.

7. Channel allocation: the channel occupied by the test can be set at will;

8. Installation of specimens: for adjusting the position of specimens before test;

9. Set the zero position and gain of the sensor to calibrate the sensor.

10. Load spectrum setting software for static test spectrum and fatigue test spectrum;

11. System Diagnosis: All kinds of hardware faults of the system can be detected before the start of the test.

12. System security protection software.



Single channel main interface:




Test sinusoidal waveform:



参数设置:



Running Tips:



Previous:NoneNext:None
Products / Related products More
2019 - 07 - 22
价格: Fatigue + Multichannel Test Software
Shenzhen Enpuda Industrial Systems Co., Ltd.
Tel:15807556480 ( Mr. Yang )
E-mail:15807556480@163.com
Address: South of Building F, Sanlian Industrial Zone, Tangtou Community, Shiyan Street, Baoan District, Shenzhen
Wechat Public Number
Technical
support
Copyright ©2019 Shenzhen Enpuda Industrial Systems Co., Ltd.
犀牛云提供企业云服务