Welcome to the official website of Shenzhen Enpuda Industrial Systems Co., Ltd!
Hotline: 400-103-8118
Products Products
联系我们

地点:深圳市宝安区航城大道西乡光电研发大厦二楼

电话:0755-2775 9293

手机:188-666-5188

邮箱:yidongyun@qq.com

EHBC-5000Y instrumented pendulum testing machine

Functional uses:

Metal pendulum impact tester is an instrument for testing the impact resistance of metal materials under dynamic load. It can perform metal impact tests continuously and in large quantities, and display the impact absorbing power, impact toughness, the rotation angle of pendulum and print test reports. It is an indispensable testing instrument for metal material manufacturers and quality inspection departments, and also for scientific research institutes to carry out new material research. The machine can be equipped with automatic sample feeding system, which can greatly improve the test efficiency and reduce the labor intensity of the test personnel. Maximum impact energy: 450J (150J, 300J), 750J (300J for swing, 450J, 600J)

It is used for metal Charpy impact test, and the impact absorption energy of metal sample is obtained.


面料: 1. GB/T 3808 'Inspection of Pendulum Impact Tester'2. GB/T 229 'Charpy Pendulum Impact Test Method for Metal Materials'3. JJG 145 Pendulum Impact Tester4. ISO 148.3 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines
类型: Instrumented pendulum testing machine
颜色:
型号:
咨询热线: 1. The main frame and the base are designed and manufactured in an integrated way. The columns are symmetrical in front and back. The pendulum shaft is supported by a simply supported beam. It has the advantages of high stability, good rigidity, simple and reliable structure, high processing accuracy, no shivering when the pendulum impact, and is more suitable for high energy impact.2. Circular pendulum design, wind resistance to the minimum. The impact cutter is installed by screw fastening wedge-shaped block, which is easy to replace.3. The pendulum-hanging device adopts buffer design, which avoids the impact of pendulum-hanging and the possible damage to it, effectively reduces the noise of pendulum-hanging, prolongs the service life of equipment and improves safety.4. The standard two-stage reducer is used to replace the complex transmission system of the old pendulum hammer. It has simple structure, convenient assembly and maintenance, long service life and low failure rate. The main trouble points of the old pendulum are solved.5. There are three ways of energy display, three ways of common display, and the results can be compared with each other, which can completely and effectively eliminate the problems that may arise.6. With a sample recovery device, the waste sample can be taken out of the test machine after impact, so that the tester can not enter the test machine to recover the waste sample, which improves the work efficiency and safety of the tester.7. A fully enclosed protective net can effectively prevent splashing of fractured specimens, and also prevent the tester from entering the inside of the tester during the test, so as to ensure the safety of the tester and equipment.
  • Standard
  • Characteristic
  • Technical parameter
  • 智能监测
Standard

1. GB/T 3808 'Inspection of Pendulum Impact Tester'

2. GB/T 229 'Charpy Pendulum Impact Test Method for Metal Materials'

3. JJG 145 Pendulum Impact Tester

4. ISO 148.3 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines


Characteristic

1. The main frame and the base are designed and manufactured in an integrated way. The columns are symmetrical in front and back. The pendulum shaft is supported by a simply supported beam. It has the advantages of high stability, good rigidity, simple and reliable structure, high processing accuracy, no shivering when the pendulum impact, and is more suitable for high energy impact.

2. Circular pendulum design, wind resistance to the minimum. The impact cutter is installed by screw fastening wedge-shaped block, which is easy to replace.

3. The pendulum-hanging device adopts buffer design, which avoids the impact of pendulum-hanging and the possible damage to it, effectively reduces the noise of pendulum-hanging, prolongs the service life of equipment and improves safety.

4. The standard two-stage reducer is used to replace the complex transmission system of the old pendulum hammer. It has simple structure, convenient assembly and maintenance, long service life and low failure rate. The main trouble points of the old pendulum are solved.

5. There are three ways of energy display, three ways of common display, and the results can be compared with each other, which can completely and effectively eliminate the problems that may arise.

6. With a sample recovery device, the waste sample can be taken out of the test machine after impact, so that the tester can not enter the test machine to recover the waste sample, which improves the work efficiency and safety of the tester.

7. A fully enclosed protective net can effectively prevent splashing of fractured specimens, and also prevent the tester from entering the inside of the tester during the test, so as to ensure the safety of the tester and equipment.


Technical parameter
项目简介:

1. The main frame and the base are designed and manufactured in an integrated way. The columns are symmetrical in front and back. The pendulum shaft is supported by a simply supported beam. It has the advantages of high stability, good rigidity, simple and reliable structure, high processing accuracy, no shivering when the pendulum impact, and is more suitable for high energy impact.

2. Circular pendulum design, wind resistance to the minimum. The impact cutter is installed by screw fastening wedge-shaped block, which is easy to replace.

3. The pendulum-hanging device adopts buffer design, which avoids the impact of pendulum-hanging and the possible damage to it, effectively reduces the noise of pendulum-hanging, prolongs the service life of equipment and improves safety.

4. The standard two-stage reducer is used to replace the complex transmission system of the old pendulum hammer. It has simple structure, convenient assembly and maintenance, long service life and low failure rate. The main trouble points of the old pendulum are solved.

5. There are three ways of energy display, three ways of common display, and the results can be compared with each other, which can completely and effectively eliminate the problems that may arise.

6. With a sample recovery device, the waste sample can be taken out of the test machine after impact, so that the tester can not enter the test machine to recover the waste sample, which improves the work efficiency and safety of the tester.

7. A fully enclosed protective net can effectively prevent splashing of fractured specimens, and also prevent the tester from entering the inside of the tester during the test, so as to ensure the safety of the tester and equipment.


适应人群:
项目流程:
技术优势:
注意事项:
蜕变前后:

1. GB/T 3808 'Inspection of Pendulum Impact Tester'

2. GB/T 229 'Charpy Pendulum Impact Test Method for Metal Materials'

3. JJG 145 Pendulum Impact Tester

4. ISO 148.3 Metallic materials - Charpy pendulum impact test - Part 3: Preparation and characterization of Charpy V-notch test pieces for indirect verification of pendulum impact machines


Previous:NoneNext:None
Products / Related products More
2019 - 07 - 11
价格: Instrumented pendulum testing machine
Metal pendulum impact tester is an instrument for testing the impact resistance of metal materials under dynamic load. It can perform metal impact tests continuously and in large quantities, and display the impact absorbing power, impact toughness, the rotation angle of pendulum and print test reports. It is an indispensable testing instrument for metal material manufacturers and quality inspection departments, and also for scientific research institutes to carry out new material research. The machine can be equipped with automatic sample feeding system, which can greatly improve the test effi...
Shenzhen Enpuda Industrial Systems Co., Ltd.
Tel:15807556480 ( Mr. Yang )
E-mail:15807556480@163.com
Address: South of Building F, Sanlian Industrial Zone, Tangtou Community, Shiyan Street, Baoan District, Shenzhen
Wechat Public Number
Technical
support
Copyright ©2019 Shenzhen Enpuda Industrial Systems Co., Ltd.
犀牛云提供企业云服务