Welcome to the official website of Shenzhen Enpuda Industrial Systems Co., Ltd!
Hotline: 400-103-8118
Products Products
Products Products
联系我们

地点:深圳市宝安区航城大道西乡光电研发大厦二楼

电话:0755-2775 9293

手机:188-666-5188

邮箱:yidongyun@qq.com

Superposition force standard machine

Functional uses:

The superposition force standard machine is a series of sensors calibrated by the force standard machine at a higher level and the detected sensors are superposed in series. The loads are automatically applied through a high precision, fully digital and wide closed-loop system. Under the same force field, the output of the two sensors is compared, and their load characteristics are evaluated comparatively. A standard force calibration equipment.

This machine is flexible and convenient to operate. It has acquired a new definition in precision control, data stability and automation. The traditional superposition force standard machine mainly detects linearity, hysteresis and repeatability. Our company's force standard machine can detect linearity, hysteresis, repeatability, SPAN (full range) and creep performance. It meets the requirement of detection in the force range of 0.05-1 MN. It is suitable for the testing and calibration of dynamometers and for various occasions of accurate force. It is also an ideal calibration instrument in the production process of dynamometers and sensors. It also produces a special force standard machine for the calibration of hook weights and wheel and axle weights.


面料: It meets the requirements of JJG734-2001 Verification Rules for Force Standard Machines, JJG144-2007 Verification Rules for Standard Dynamometers, JJG391-2009 Verification Rules for Force Sensors and JJG 669-2003 Verification Rules for Weighing Sensors.
类型: Superposition force standard machine
颜色:
型号:
咨询热线: 1. Specifications, varieties and functions are complete: EHBZ superimposed force standard machine has produced 50 kN, 100 kN, 200 kN, 300 kN, 500 kN as electronic type; 600 kN, 1000kN, 2000 kN, 5000kN, 1MN as innovative two-way balanced servo cylinder loading, with pressure and tension type, are fully automatic, its column spacing is wide, can be placed to accommodate more. A high and low temperature box with sensors.It has the versatility of detecting all kinds of sensors. It can detect the linearity, hysteresis, repeatability or comprehensive error, sensitivity, creep and creep recovery, and high and low temperature performance of sensors.2. Force standard machine has good performance, the general first check accuracy is 0.02%; the stability of automatic every 30 minutes or longer is better than (+0.003%F.S); the precision of automatic sampling is (+0.002%F.S.) or (+0.001%F.S); the time of pre-pressing is about 1 minute, for five-stage detection, one-step and return is about 8 minutes, and one-step and return is 5 minutes. About.It works reliably and has a very low failure rate. It is usually used for several years without any failure. Some users work 24 hours a day and can be used continuously.3. The adjustment and loading of test space is accomplished by an independent transmission mechanism and loading system. It meets the requirements of small load, large displacement, fast speed and large load, small displacement and high stability.4. Fully automatic use of high viscosity broadband servo loading system, a set of mechanisms to complete rough loading, fine loading, regulation and stability.5. The superposition force standard machine controlled by piezoelectric ceramics is realized by the deformation of piezoelectric ceramics. The measurement department found that the azimuth error was large and could not meet the requirements. The analysis shows that it may be due to the inconsistency of component deformation, which changes the flatness of the stress surface and results in poor azimuth. The EHBZ type force machine is not the same. The horizontal displacement of the force plane loaded by electronics and cylinders does not change the level of the force plane, thus ensuring the accuracy of the force machine.6. Timely monitoring, multi-layer protection, EHBZ force machine loading process can be monitored at any time, problems can be timely alarmed and prompted to ensure the safety of loading. At the same time, there are pressure protection, travel protection and other protective measures, which can effectively prevent overload and protect the sensor from being crushed.7. Imported key components, such as German HBM calibration level sensor, Japanese Panasonic Server, American MOOG servo valve, German Rexroth cylinder and seals, guarantee the stability and reliability of the standard.
  • Standard
  • Characteristic
  • Technical parameter
  • 智能监测
Standard

It meets the requirements of JJG734-2001 Verification Rules for Force Standard Machines, JJG144-2007 Verification Rules for Standard Dynamometers, JJG391-2009 Verification Rules for Force Sensors and JJG 669-2003 Verification Rules for Weighing Sensors.

Characteristic

1. Specifications, varieties and functions are complete: EHBZ superimposed force standard machine has produced 50 kN, 100 kN, 200 kN, 300 kN, 500 kN as electronic type; 600 kN, 1000kN, 2000 kN, 5000kN, 1MN as innovative two-way balanced servo cylinder loading, with pressure and tension type, are fully automatic, its column spacing is wide, can be placed to accommodate more. A high and low temperature box with sensors.


It has the versatility of detecting all kinds of sensors. It can detect the linearity, hysteresis, repeatability or comprehensive error, sensitivity, creep and creep recovery, and high and low temperature performance of sensors.


2. Force standard machine has good performance, the general first check accuracy is 0.02%; the stability of automatic every 30 minutes or longer is better than (+0.003%F.S); the precision of automatic sampling is (+0.002%F.S.) or (+0.001%F.S); the time of pre-pressing is about 1 minute, for five-stage detection, one-step and return is about 8 minutes, and one-step and return is 5 minutes. About.


It works reliably and has a very low failure rate. It is usually used for several years without any failure. Some users work 24 hours a day and can be used continuously.


3. The adjustment and loading of test space is accomplished by an independent transmission mechanism and loading system. It meets the requirements of small load, large displacement, fast speed and large load, small displacement and high stability.


4. Fully automatic use of high viscosity broadband servo loading system, a set of mechanisms to complete rough loading, fine loading, regulation and stability.


5. The superposition force standard machine controlled by piezoelectric ceramics is realized by the deformation of piezoelectric ceramics. The measurement department found that the azimuth error was large and could not meet the requirements. The analysis shows that it may be due to the inconsistency of component deformation, which changes the flatness of the stress surface and results in poor azimuth. The EHBZ type force machine is not the same. The horizontal displacement of the force plane loaded by electronics and cylinders does not change the level of the force plane, thus ensuring the accuracy of the force machine.


6. Timely monitoring, multi-layer protection, EHBZ force machine loading process can be monitored at any time, problems can be timely alarmed and prompted to ensure the safety of loading. At the same time, there are pressure protection, travel protection and other protective measures, which can effectively prevent overload and protect the sensor from being crushed.


7. Imported key components, such as German HBM calibration level sensor, Japanese Panasonic Server, American MOOG servo valve, German Rexroth cylinder and seals, guarantee the stability and reliability of the standard.


Technical parameter
项目简介:

1. Specifications, varieties and functions are complete: EHBZ superimposed force standard machine has produced 50 kN, 100 kN, 200 kN, 300 kN, 500 kN as electronic type; 600 kN, 1000kN, 2000 kN, 5000kN, 1MN as innovative two-way balanced servo cylinder loading, with pressure and tension type, are fully automatic, its column spacing is wide, can be placed to accommodate more. A high and low temperature box with sensors.


It has the versatility of detecting all kinds of sensors. It can detect the linearity, hysteresis, repeatability or comprehensive error, sensitivity, creep and creep recovery, and high and low temperature performance of sensors.


2. Force standard machine has good performance, the general first check accuracy is 0.02%; the stability of automatic every 30 minutes or longer is better than (+0.003%F.S); the precision of automatic sampling is (+0.002%F.S.) or (+0.001%F.S); the time of pre-pressing is about 1 minute, for five-stage detection, one-step and return is about 8 minutes, and one-step and return is 5 minutes. About.


It works reliably and has a very low failure rate. It is usually used for several years without any failure. Some users work 24 hours a day and can be used continuously.


3. The adjustment and loading of test space is accomplished by an independent transmission mechanism and loading system. It meets the requirements of small load, large displacement, fast speed and large load, small displacement and high stability.


4. Fully automatic use of high viscosity broadband servo loading system, a set of mechanisms to complete rough loading, fine loading, regulation and stability.


5. The superposition force standard machine controlled by piezoelectric ceramics is realized by the deformation of piezoelectric ceramics. The measurement department found that the azimuth error was large and could not meet the requirements. The analysis shows that it may be due to the inconsistency of component deformation, which changes the flatness of the stress surface and results in poor azimuth. The EHBZ type force machine is not the same. The horizontal displacement of the force plane loaded by electronics and cylinders does not change the level of the force plane, thus ensuring the accuracy of the force machine.


6. Timely monitoring, multi-layer protection, EHBZ force machine loading process can be monitored at any time, problems can be timely alarmed and prompted to ensure the safety of loading. At the same time, there are pressure protection, travel protection and other protective measures, which can effectively prevent overload and protect the sensor from being crushed.


7. Imported key components, such as German HBM calibration level sensor, Japanese Panasonic Server, American MOOG servo valve, German Rexroth cylinder and seals, guarantee the stability and reliability of the standard.


适应人群:
项目流程:
技术优势:
注意事项:
蜕变前后:

It meets the requirements of JJG734-2001 Verification Rules for Force Standard Machines, JJG144-2007 Verification Rules for Standard Dynamometers, JJG391-2009 Verification Rules for Force Sensors and JJG 669-2003 Verification Rules for Weighing Sensors.

Previous:NoneNext:None
Products / Related products More
2019 - 07 - 11
价格: Superposition force standard machine
The superposition force standard machine is a series of sensors calibrated by the force standard machine at a higher level and the detected sensors are superposed in series. The loads are automatically applied through a high precision, fully digital and wide closed-loop system. Under the same force field, the output of the two sensors is compared, and their load characteristics are evaluated comparatively. A standard force calibration equipment.This machine is flexible and convenient to operate. It has acquired a new definition in precision control, data stability and automation. The tradition...
Shenzhen Enpuda Industrial Systems Co., Ltd.
Tel:15807556480 ( Mr. Yang )
E-mail:15807556480@163.com
Address: South of Building F, Sanlian Industrial Zone, Tangtou Community, Shiyan Street, Baoan District, Shenzhen
Wechat Public Number
Technical
support
Copyright ©2019 Shenzhen Enpuda Industrial Systems Co., Ltd.
犀牛云提供企业云服务