Welcome to the official website of Shenzhen Enpuda Industrial Systems Co., Ltd!
Hotline: 400-103-8118
Products Products
Products Products
Hot Products / Hot products More+
2019 - 06 - 12
It is mainly used to test the dynamic and static mechanical properties of various materials, parts, elastomers, shock absorbers and components. It can perform tensile, compressive, bending, low and hi...
2019 - 06 - 12
It is mainly used to test the dynamic and static mechanical properties of various structural parts, components, buffer blocks, rubber elastomers, shock absorbers, beams and columns. It can perform ten...
2019 - 07 - 22
This machine is mainly suitable for torsion test of various materials such as automobile electromagnetic clutch, rubber recoil pulley, metal, non-metal shaft products and connectors. It can carry out ...
2019 - 06 - 12
This machine is mainly suitable for torsion test of various materials such as automobile electromagnetic clutch, rubber recoil pulley, metal, non-metal shaft products and connectors. It can carry out ...
2019 - 06 - 12
It is mainly used for torsion test of metal and non-metal materials. Torque and torsion angle can be controlled. Torsion test of parts and components can also be carried out by adding corresponding ac...
2019 - 07 - 11
It is suitable for fatigue testing of various materials and components in the fields of biology, electronics, elastomer and small specimen.
联系我们

地点:深圳市宝安区航城大道西乡光电研发大厦二楼

电话:0755-2775 9293

手机:188-666-5188

邮箱:yidongyun@qq.com

时间: 2019 - 07 - 11
The digital drop hammer tear tester is mainly suitable for the drop hammer tear test of ferrite steel. The free drop hammer impacts on the specimen, which makes the specimen fracture. The fracture morphology of the sample is observed after impact. Replacement of accessories can also be used for drop weight tearing test and result evaluation of metal parts or components, and the impact energy, impact height and impact time can be obtained.It meets the technical requirements of GB/T 8363-200 'Ferr...
时间: 2019 - 07 - 11
The superposition force standard machine is a series of sensors calibrated by the force standard machine at a higher level and the detected sensors are superposed in series. The loads are automatically applied through a high precision, fully digital and wide closed-loop system. Under the same force field, the output of the two sensors is compared, and their load characteristics are evaluated comparatively. A standard force calibration equipment.This machine is flexible and convenient to operate....
时间: 2019 - 06 - 12
The main equipment for technological test of metal (non-ferrous and black) sheet and strip. The national standard GB/T4156-2007/ISO20482:2003 'Erickson cupping test for sheet metal and strip metal' can be realized to test the plastic deformation properties of sheet metal and strip metal.
时间: 2019 - 07 - 11
Metal pendulum impact tester is an instrument for testing the impact resistance of metal materials under dynamic load. It can perform metal impact tests continuously and in large quantities, and display the impact absorbing power, impact toughness, the rotation angle of pendulum and print test reports. It is an indispensable testing instrument for metal material manufacturers and quality inspection departments, and also for scientific research institutes to carry out new material research. The m...
产品名称: Fused grease
型号: Fused grease
时间: 2019 - 07 - 22
The melt flow rate tester is used to measure the melt flow rate volume method (MVR) and mass method (MFR) of thermoplastic resin. It is suitable for the determination of melting index of polyethylene, polystyrene, polypropylene, ABS resin, polyformaldehyde resin, polycarbonate, nylon, fluoroplastics, polyaromatic sulfone and other plastic raw materials. This product is widely used in the production of plastic raw materials, plastic products, petrochemical industry and other industries, as well a...
产品名称: Vica
型号: Vica
时间: 2019 - 07 - 22
Thermal deformation and Vicat softening point temperature tester is used to measure the thermal deformation and Vicat softening point temperature of polymer materials.
时间: 2019 - 07 - 22
Plastic pendulum impact tester is an instrument for testing the impact resistance of non-metallic materials such as plastics, nylon, rubber, glass fiber reinforced plastics, composite plastic pipes and electrical insulation materials under dynamic load. The machine can be divided into pointer type and liquid crystal type according to the display mode. The machine is easy to operate and has high efficiency. It can be used for simple-supported beam test, cantilever beam test and tensile impact tes...
产品名称: Notch prototype
时间: 2019 - 07 - 22
The notch prototyping machine is a notch which is used to prepare impact test splines of simple grain and cantilever beam by mechanical processing method.
时间: 2019 - 07 - 22
Dumbbell prototyping machine is used to prepare dumbbell-shaped specimens of non-metallic materials for tensile test.
Relevant news / News More
  • 点击次数: 15
    2019 - 11 - 09
    With the rapid development of the economy and the continuous improvement and innovation of the company's fatigue testing machine product research and development technology, our company is constantly expanding the international market and has been recognized by foreign customers.On November 3, foreign agents came to our company's workshop to visit and inspect. Our company Yang always warmly received Southeast Asian customers from afar. The Southeast Asian customers' trip was mainly to visit our company's dynamic fatigue testing machine. Accompanied by the technical director, the customer visited the production and test demonstration center and introduced the main product of our company's dynamic fatigue testing machine and the newly developed test software. Subsequently, Mr. Yang and forei...
  • 点击次数: 508
    2019 - 08 - 02
    Our company has been studying and exchanging with Professor Huang Peiyan, School of Civil Engineering and Communications, South China University of Technology for a long time. Under the guidance of Professor Huang Peiyan, we have a deep understanding of the durability, fatigue fracture and corrosion resistance of bridge structures. With rich experience, strong technical force and good corporate reputation, Empoda successfully won the bid on July 30 for the project of Creep Load Long-term Performance Testing System, a large-scale environmental simulation cabin of Southeast University Urban Science and Technology Research Institute, and related projects, through layer-by-layer screening and fierce competition.
  • 点击次数: 845
    2019 - 08 - 01
    Distinguished users:Hello! First of all, thank you for your long-term concern and support for Empoda Industrial Systems Co., Ltd.  This revision includes computer website (www.szenpuda.com) and mobile website (m.szenpuda.com), aiming to further play the role of external publicity and communication of the website, and to provide customers with better service. At the same time, it also shows customers the new look of Enpda's continuous development.Compared with the old version of the website, the new page style is adopted and the whole structure is clearer. But we can't be perfect either. If this revision brings you trouble, please leave us a message online. We will accept it modestly, adjust it in time, and strive to make the website better.Enpda is more wonderful for you. We will...
  • 点击次数: 1116
    2019 - 06 - 11
    Recently, our company has successfully passed the ISO 9001:2008 quality management system certification of Shenzhen Bid Winning International Certification Center. It marks that our company has stepped into a standardized, standardized and scientific track of modern enterprise management.The certificate of ISO901:2008 quality management system certification is the standardized and standardized comprehensive inspection of the company's various management work, and an important guarantee for the company's sustained, stable and healthy development. We will further optimize and standardize various management systems, continuously improve the effectiveness of the system operation, continuously improve the management level of the company, and jointly promote the rapid development of the company....
Shenzhen Enpuda Industrial Systems Co., Ltd.
Tel:15807556480 ( Mr. Yang )
E-mail:15807556480@163.com
Address: South of Building F, Sanlian Industrial Zone, Tangtou Community, Shiyan Street, Baoan District, Shenzhen
Wechat Public Number
Technical
support
Copyright ©2019 Shenzhen Enpuda Industrial Systems Co., Ltd.
犀牛云提供企业云服务